How do I configure the Hollywood Plus card in IC200?
First you must turn on the MCI MPEG EX in IC200/Tools/Options/Scala EX
Modules. After placing a check mark next to MPEG.EX double click on the
MCI MPEG EX to get the MCI MPEG EX Options.
It is key that you set the Display Mode in the MPEG EX to be the
same resolutions defined in IC200/Tools/Options/ defined in Play, Menu,
and Design Resolutions. They all should be the same. Typical would be
800 x 600, High Color, and 60 Hz. Don't use the Adapt or Current
option. Make sure the Desktop is set the same.
When running on a Windows 98 system select "Use 16-Bit MCI" and "Close MCI After Playback" only.
When running on a Windows NT 4.0 or Windows 2000 system select "Disable Double Buffering" and "Close MCI After Playback" only.
Save Settings.
